O'MEGA20 - REVERSE OSMOSIS SYSTEM - 5000 GPD @ 77°F
Standard features
Model
O'MEGA20
Design
Vertical
Liters/day (GPD)
20 000 @ 25°c (5000 @ 77°F)
Dimensions mm (approx)
760 x 965 x 1200
Weight
250 Lbs
Concentrate Re-circulate
Optional
Auto Flush
Optional
Element Size
40x40 TFC HF1
Elements
3
Motor HP
1.5
Voltage
220 or 110
Hertz
50 or 60
Feed connection
3/4"
Product connection
1"
Waste connection
1"
HydroBlend
Optional
System specifications
- Membrane: Three 4" x 40" TFC HF1 Membranes - For maximum rejection of impurities and high flow.
- Membrane Housing: Three 4" x 40" Champ Membrane Housings - Features a patented design and requires no tools when servicing.
- Pump & Motor: One Goulds® 1.5 HP Multistage Pump and Motor 110 or 220 volt 50 or 60 hertz 1 Phase - Designed for continuous high pressures.
- Frame: One Aluminum White Powder Coated - Corrosion resistant and light weight.
- Sediment Filter: One 4.5" x 20" Big White 5 Micron Sediment Filter - Removes sediments and protects the system.
- Carbon Block: One 4.5" x 20" Big White 10 Micron Carbon Block - Removes Chlorine, odor, and taste from incoming feed water.
- Sediment Filter: One 4.5" x 20" Big White 1 Micron Sediment Filter - Removes sediments and protects the system down to 1 micron.
- Filter Housing: Three 4.5" x 20" Big Grey Double O-Ring Filter Housings -Offers durability and improved sealing capabilities.
- Pressure Gauges: Two 2.5" 0-300 PSI Panel Mount Glycerin Filled Gauge and Two 1.5" 0-160 Top Mount Dry Gauges - For monitoring the system's operating pressure and the filter & carbon operating pressure.
- Low Pressure Switch: One McCanns® Low Pressure Switch - Safety device to protect the pump from running dry when there is insufficient feed water pressure.
- Solenoid Valve: One Solenoid Valve with Manual Override 110 or 220 Volt 50 or 60 Hertz - Assists with the on/off functionality of the system.
- Manual Flush Valve: One 1/2" Stainless Steel Needle Valve - Regulates the product to waste ratio (system's recovery).
- Computer Controller: One Minitrol Computer Controller 110 or 220 volt with pre-treat lockout, tank full contacts, low pressure monitoring, and alarm.
- Flow Meters: One Product (0-10 GPM) & One Waste (0-10 GPM) Flow Meters - Enables operator to accurately adjust product to waste ratio and monitor systems performance.
- TDS Meter: One Panel Mount TDS Meter - Provides you with accurate readings of the product water quality.
- Easy Maintenance & Operation: O'MEGA reverse osmosis systems feature a compact design and have all of their components strategically located for easy access and inspection.
System operating specifications
Minimum Feed Pressure
2.5 bars (35 psi)
Operating pressure
11 bars (150 psi)
Minimum Feed
7 GPM
Maximum Feed
15 GPM
Maximum TDS
2 000 ppm
Maximum Hardness
10°F (15 grains per US Gallon)
Nominal NaCl % Rejection
98.5%
Minimum NaCl Rjection
96%
pH range
3-11
Maximum Température
37°c (105°F)
Optional features
- Stainless Steel Housings.
- High Pressure Switch: One Square® D High Pressure Switch.
- Float Switch: One Mechanical Float Switch ? For atmospheric storage tank applications.
- Auto Flush: This feature will flush the system?s membranes with the feedwater, thus extending membrane life.
- Concentrate Recirculate: This feature offers a higher recovery rate for the system by taking a % of the waste water and feeding it back into the system.